Penrite 500,000 km Red Coolant Premix 20L | COOL500REDPMX020
500,000KM Red Coolant Premix is a Type A anti-freeze/anti-boil, silicate, phosphate and amine free coolant, safe for all types of light and heavy duty vehicles. It uses a technically advanced OAT (Organic Acid Technology) inhibitor formulation which provides a stable long life coolant that prevents rust, corrosion, cavitation and degradation of the cooling system.
Application
500,000KM Red Coolant Premix is suitable for passenger cars, 4WD’s, motorcycles, light & heavy duty commercial vehicles, construction and agricultural equipment It can be used in Australian, European, Asian and US vehicles that specify an OAT type anti-freeze/anti-boil coolant.
500,000KM Red Coolant Premix is suitable for the cooling systems of petrol, LPG, light and heavy duty diesel, industrial engines and motorcycles where Type “A” anti-freeze / anti-boil and anti-corrosion properties are required. It provides long-term protection against rust and corrosion for all materials used in the engine and the cooling system. It protects cast iron, aluminium, copper and solder alloys as well as the hoses, seals and plastics. It is effective in all cast iron and aluminium engines that are under load or used in extreme hot and cold climates.
500,000KM Red Coolant Premix is a 33% concentration formulation and is ready to use directly from the container. It is pre-mixed with Penrite De-Mineralised Water and can be poured directly into the cooling system. No further dilution is required. It can be used as a complete service refill, top up and is safe to mix with compatible Type A coolants.
- Penrite recommends flushing the cooling system prior to a complete service refill. Penrite Radiator Flush effectively cleans the system in 7 minutes and prepares the cooling system for new coolant.
Dose Rate - Freezing Point Boiling Point
| Mix Ratio | 33% |
| Freezing Point | -18°C |
| Boiling Point | +104°C |
Service Intervals
| When used as indicated and correctly maintained | |
| Passenger Cars, 4WD, Light Commercial | 500,000 KM |
| Heavy Duty On Highway | 500,000 KM |
| Heavy Duty Off Highway | 5,000 Hours |
Key benefits
- 500,00km drain intervals if used and maintained at 33% concentration levels
- Compatible with all plastics, rubber and seals
- Protects all internal surfaces from corrosion, including aluminium
- Meets with many manufacturer’s specifications
- Phosphate free formulation allows use with hard water
- Silicate and Amine
- Suitable for Asian vehicles specifying non-silicate coolant
Key specifications
- AS/NZS 2108-2004 Type A
- ASTM D-3306
- ASTM 4985
Suitable for these specifications
- AS/NZS 2108-2004 Type A
- ASTM 3306
- ASTM 4985
- BS 6580
- Fiat 9.55523
- Ford ESE M97-B44D
- GM 1825M
- GM 1899M
- GM 6277M
- Holden HN 1825M
- JASO M325 (Japan)
- JIS K2234 (Japan)
- KSM 2142 (Korea)
- Mitsubishi ES-X64217
- MTU MTL 5048
- Nissan NES M5059
- Opel B 040 1065
- Renault 41-01-001Q Type D
- SAAB GM6277M
- SAE J1034
Typical data
| Colour | Red |
| Boiling Point Point °C | >160 |
| Density at 20°, kg/L (33% Concentration / Premix) | 1.05 |
| pH | 7.5 - 9.5 |
Key details
| Brand | Penrite |
| Part number | COOL500REDPMX020 |
| Size | 20L |
| Product type | Premix |
| Barcode | 9316517250175 |
Not sure it's the right product? Call us on (07) 3340 4392, Mon–Fri 8:30am–5pm, or order online and Click & Collect from our Acacia Ridge store.
| Brand | Penrite |
|---|---|
| Part number | COOL500REDPMX020-PEN |
| Category | Coolant |
| Barcode | 9316517250175 |
Free shipping on orders over $150 Australia-wide, for orders under 4.8 kg.
Click & Collect from 111 Beenleigh Road, Acacia Ridge QLD, Monday to Friday 8:30am–5:00pm.